Raytheon ST6000 Plus Specifications download pdf (Page 39)

Chapter 3: Advanced Operation

Watch alarm

WATCH ALM

The Watch alarm is activated in Watch mode when the timer reaches

4 minutes. It is not available from Standby mode.

If you wish to set the Watch mode, the WATCH screen must be

configured as one of the Data Pages for display, as described in section

5.1.

To set and control the Watch alarm:

1. Select Auto, Track or Vane mode.

2. Press the disp key until the WATCH Data Page is displayed.

• The watch timer starts counting.

• When the timer reaches 3 minutes, the text on the display starts

flashing to indicate the last minute of Watch alarm.

• When the timer reaches 4 mins, the audible Watch alarm

activates.

3. Press auto at any time to silence the alarm and reset the timer to

4 minutes. (Pressing any other key resets the timer and perform the

key’s normal function.)

4. To clear Watch mode, press disp to display a different page, or

press standby.

Note: You cannot engage Auto mode from Watch mode – pressing

auto only resets the Watch timer.

Man overboard (MOB)

If a man overboard (MOB) message is received from another

instrument on the SeaTalk system, the text MOB is shown instead of the

waypoint number for the XTE, DTW and BTW Data Pages.

If the autopilot is operating in Track mode, the Waypoint Advance

alarm will sound to notify the change in waypoint.

133_3c03.p65 14/06/99, 10:2327

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 89 90

No comments

Raytheon ST6000 Plus Specifications Page 39